Exhibitors

Determination of wear resistance of tires using rotating cylindrical method Used for quality control, comparative tests, test of compliance with judgment of Research and study activities Included a sample holder with standard diameter and the ability to adjust the height of the sample with standard angle deviation Included a rotating cylinder with the diameter of 150 mm and length of 500 mm and a speed of 40 rpm Ability to perform the test in rotating and non-rotating sample modes Included a 4.3-inch color touch screen for easy settings Provision of vertical pressure force of 5, 10 and 20 N by standard weights Equipped with Plexiglas protection for safety and do not spread of samples Ability to adjust the wear distance at different levels Designed and manufactured in accordance with ISO 4649 and ASTM D5963 standards

Included 2 pressure lines to perform discharge test with working pressure from 0.01 to 8 bar Equipped with 7-inch color touch screen display with Windows operating system for easy test settings Ability to display pressure graphs over time on the screen and the ability to connect to flash memory and save Test results using computer software Included a pressure line to perform hot water hydrostatic pressure test with insulated steel tank with circulation system and water heating up to 70 ° C Performing tests in accordance with ISO 9261 and National Standard 6775

Determining the rheological and mechanical properties of rubber mixture during curing Drawing diagrams of S, S , S , and temperature vs time Determining the curing time, scorch time and rate index for elastic momentum curves Equipped with 7-inch color resolution touch screen for easy set up Included with a comprehensive computer software to control, report and save test results Direct contact of the models with the sample without delay and temperature drop with the ability to change the models separately Equipped with bar elements from ambient temperature up to 250 with the resolution of 0.1 C Protection of device and automatic closing system by DC motor Operating torque range 0 to 250 d N.m with an accuracy of 0.01 d N.m Constant oscillation frequency at 0.5 to 2 Hz with a tolerance of 0.1 Hz Ability to select the ranges of oscillation mechanically (0.5, 1 and 3 degree)

Determination of the oxidation induction time for polymer products using Dynamic Difference Calorimeter technique The ability to perform the test both for raw material and final product Drawing diagrams of temperature and enthalpy based on time continuously in the form of automatic scale Equipped with gas-fired valves of oxygen and nitrogen entree gases with automatic switching capability Double-point calibration according to the standard and with a cooling system Furnace with the ability to increase the temperature up to 400 C and precision of 0.1 °C and with the ability to adjust the desired temperature increase rate PC connectivity to receive data and doing tests through USB port Test operation accordance with the standards ASTM D3418, ASTM D3895, ISO 11357-6, EN 728

System operation electro electrically using wing screw and AC Servo motor and driver with Close Loop control system Ability to perform tests: Tensile test, Compression, Cyclic, Bending, Creep Relaxation in accordance with international standards ASTM, DIN, EN, ISO Ability to install specialized jaws, internal and external extensometers and the ability to install a furnace and perform hot testing up to a temperature of 10oo °C Equipped with C3 class load cells in different capacities with a combined error of less than 0.02°10 full scale (< +-0.02% FS) Equipped with accurate displacement sensor to measure device cross head displacement Included with a powerful software under the Windows operating system and providing a complete test report without restrictions, storage and retrieval of previous test data Full computer device control and connection via USB port with power calibration capability and extensometer displacement

Determination of internal pressure resistance of pipes and fittings at different time intervals by performing hydrostatic pressure and burst test Connection via network port (LAN) and wireless connection (Wi-Fi) to the computer, with advanced software to control and perform tests as well as plotting pressure, time and temperature Equipped with a 7-inch color touch screen for easy settings Equipped with a logger to store test results without the need for a continuous connection to the computer for up to 10,000 hours Ability to determine the rate of pressure increase and pressure control in the range of 2% and -1% of the set pressure Equipped with electric motor pump, pressure sensor and high quality solenoid valves

Made of steel sheet with different interior dimensions Equipped with circulation fan in order to simulate the temperature uniformity inside the compartment Equipped with digital control system to easy setting up the temperature, time, and alarm warning Temperature controlling with a degree of resolution of 0.1 ° C Industrial compressor and condenser appropriate for the temperature range With a temperature range from - 45 ° C to 60 ° C upon request

Measurement of elastic elasticity of rubber in a specified hard range, by pendulum method Equipped with 4.3-inch color touch screen for easy setting Featured with a strong pendulum and is equipped with a standard spherical hammer Designed based on impact center and has a capacity of 0.5 J Featured with automatic pendulum release system Equipped with test holder with the ability to adjust the position to hold the test with different thicknesses Display the return height and stiffness of each test digitally Designed and manufactured in accordance with ISO 4662, ASTM D7121, DIN 53512

Featured PID control system with digital display for easy application setup for easy test setting Equipped with cast masses of different dimensions with Swedish Kanthal wire material with long service life and temperature uniformity inside the furnace With capability of increasing the temperature up to 1200 ° C, and thermocouple type k with a precision of 1 ° C Equipped with accessories such as glass equipment, nitrogen capsules, flow meter, and chemicals appropriate to the type of test Performing test in accordance with the standards ISO 6964, ISO 3451, ASTM D1603

Full steel inner compartment with the fan circus in various dimensions upon customer s request Temperature range between 50 to 250 °C display accuracy 0.1 °C PID controlling system equipped with 5-inch color touch screen for easy application setup of temperature, time, and alarm warning Insulated with a thickness of 6 cm around the inner compartment Equipped with timer with time setting ability Temperature stability and uniformity in the compartment Classified inner compartment upon request