Exhibitors

Working pricible of the batch type, to expand a fied mass of raw material in a fied volume which enables to reach easily desired density.Dosing Unit, to weigth the rigth amount of EPS for the adjusted density. Filling to the vessel is done by gravity. Expansion chamber made of AISI 304 stainless steel, cylindrical shape. Agitator and accessories made of AISI 304 stainless steel, speed control via drive. With the adjustable speed in different steaming phases, enables to process different materials. Discharge door located on the floorof the vessel, to empty the chamber fast.Machine has a built-in silo control system, with the rigth hardware you can operate this part. Pre-expanded beads from the pre-expander conveyed to the storage silos for 1st and 2 nd expansion stages by starwheel rotary.

Blockmould is designed in vertical shape, with only one side openning which ensures the steam and vacuum tigthness 100% during the process. This is also needed for the pressure sertification and during operation machine needs less service. Described dimensions on the blockmould and working pressure indictes that the unit is a kind of pressure vessel (box) and needed to be used specifed materials and inspection from a notify body.(TUV-Bureu Veritas vb) The certificates for inpection will be delivered together with the machine and this protects the buyer and the seller from the future problems against labour issiues. Machine is produced with fixed walls according to the demand we can also offer adjustable walls.

Shape Moulding with hi-tech process control with advantages like, fast mould change system with a clamping frame galvanized. Mould change within 15 minutes. Roboust body with complete milling job is done with all parts.Guide bars 2-4 pieces according to the size of the machine. Hydraulic system allows fast movemets with a soft action, or alternative Electrical drive even more faster action. All steam and air control is proportonally driven which creates energy saving and fast cycle times. Equipped with fast mould change system Proportional control for Steam & Air De-loading and Stacking robot Surface treatment mouldings Electrical drive with knee lever

AKKAYA EPS cutting line, equipped with oscillating cutting, rigid body, precise cutting properties. Modular system enables the line for upgrade whenever necessary, operator friendly control system for large productions. Special designed hot wire oscillation, has an automatic speed control system during cutting. This gives the change for fast cutting without any wire break. This option installed only on horizontal cutting station. With long stroke oscillation and adjustable oscillation speed guarantees the fastest cutting speed at all time with a smooth surface. Horizontal cutting unit equipped with wire break system, which stops the cutting for broken wire. Oscillation system operates only with autowire setting option.

SILO BAGS Antistatic Polyester Material (Made in Germany) Custom made silo bags Silo-bag sewn of synthetic permeable to gas fabric, color similar to white in antistatic design (Electrostatic discharges are via woven carbon threads-not steel threads!) Silo top-cover with large filter cloth sections for optimal dust free venting Silo-inlet suitable for feeding pipes 200-250 mm i.d. (or as per requirement) Silo-outlet suitable for Akkaya- Silo-outlets for block or shape moulding production (or as per requirement) Two (2) inlets on side for level control sensors (min/max level) Zipper in the cone part for complete silo cleanout SILO FRAMES Corrosion protected 1 layer primer painted Custom Made Silo Frames Produced by round pipe or rectangular profile which is calculated and designed according to the silo volume. It is protected by anti-rust.

General explanation of the process: The machine is located horizontally with two door opening on the left and rigth sides.Machine itself has a fixed mould for the top part of the element and the moulds are external for each dimension. Top of the machine can be dismantable for preparetion and service during the operation. Movement: For the top figures on the element and demoulding step , bottom of the machine is moving Max.100 mm by Spindle Drive (SERVO). Filling of the machine: Material filling of the machine is done by fill injectors with quantity of 2 pcs every 50 cm distance.And has a filling tank 4 pcs of 150 lt volume which is suitable for minimum two continous cycles. Cooling: The top of the machine has a fixed cooling with water. And the bottom part(mould )has a self cooling when the mould is deloaded from the machine. Demoulding: Bottom of the machine is moving by spindle drive up to 100 mm tol et the mould come out of the steaming chamber.Then with a crane finished parts are taken out from the mould by operator manually. Vacuuming: The machine has a vacuum system with 2 vacuum pumps 5.5 Kw each and a vacuum tank 5 m3 to prevent enough vacuum for the process. Steaming: The body of the machine has a design to have a good fusionon the all sides of the part even on the inserted parts with cross steaming process from top to bottom as well as inverse direction. Steaming is controlled with a proportional steam valve and a feed back from a foam pressure sensor to have less stabilization time and enough steaming, which is located on the fixed side of the machine. -Process Control: By Siemens S7-200 type PLC unit with a touch screen display from Siemens. Operetaion Language English. All the process is controlled via touch panel and process continued automatically for every cycle. Mould Inserts: The mould (female part)has a design like butterfly which means moveable both walls with a angle 30°.This helps to put the metallic and ceramic inserts on the outer walls of the part and the metallic structure inside the material.

BASIC UNIT: Max. Pack. Dim: 600 1200 600(650) mm Packaging in polyethylene film (PE Foil) Capacity: 8-10 pack./min. Sheets of styropor are manually brought on the inlet(feeding) part of machine and after that process is fully automated. High speed sequences of automatic cycles. Servo motor for pusher and welding head (Siemens) BASIC TECHNICAL SPECIFICATION FOR APM-1300 Orientation - right Operating voltage - 400 V, 50 Hz Air pressure - 6 bar Maintanance free welding head with teflon coating Foil feeding rolls for top and bottom foil Microprocessor control device - Siemens Seal/ foil width max. - 1.250 mm Paint in - RAL5015 Densities - according to EN 13163 standards TECHNICAL DESCRIPTION FOR FILM -Film Material - Standard PE film LDPE pure, no regrind add -Thickness- 20-45 µ - most usual thickness is 30 µ -Melt index of PE - 2-3 -Slip additives - without slip additives -Elasticity of PE along - app.10 % - elasticity is not stretching İt is a tolerance of deformation -Elasticity of PE cross - less than beter -Film Width: - 1.040 mm for 1.000 mm EPS

EPS PRE CRUSHER UNIT-AKM: Unit used for the recycling of scrap materials. With opening on the top 1230x600 mm built into sound insulated cabinet.(4 Kw) with 6 mm screen 10 m3/h, with 10 mm screen 15 m3/h Density range: 6-35 kg/m3. Other screen sizes upon request. Made by mineral wool,painted steel sheet. TRANSPORT FAN 1 Pcs Type: FHR 18 5,5 Kw EPS COMPLETE DE-DUSTING UNIT-ATM: Unit used to collect EPS dust generated during the recycling process. In complete sound insulated cabinet with one dust-separation unit and transport fan ( 4 Kw) to transfer the recycled material to the storage silos as well as blower (2,2 Kw) to transfer the dust to the filter unit. Max. 300 lt. filter bags to filter the dust coming from the dust separation unit. COMPACTOR FOR DUST TYPE-ATS: During the recycling process, the dust generated in the De-duster unit is collected in the silo. Machine for compacting the dust which remains in the silo that located below the dust filter groups. EPS MIXING STATION-AMX: 2 rotary type mixers 400 mm diameter. 1 rotary is running at constant speed (virgin material). 2 rotary is running upon mixing percentage ,controlled electronically. The system includes two identical silos , one is for virgin material and second one is for crushed material. Capacity: 10 m3 Connection dimension: R200 pipe.